Call us (914) 698-0280
Equipment Rentals in Westchester County NY
Aldian has both gas and electric power tools to do just about any job for the home owner as well as a contractor. Aldian has a wide array of drills and all kinds of saws ranging from a road saw that can cut through asphalt to a saw that will make chair rail and base miter cuts, helping with any woodworking job. If you have a demolition job where you need to break up concrete in a basement call us so we can give you the electric hammer you need to knock out the job in no time.
The Band Saw delivers long tooth life and exceptional durability in metal-cutting applications, including strut, conduit, angle iron, copper tube, threaded rod, and pipe. Tooth form, pitch, and set have been designed to deliver straight, accurate cuts across a broad range of materials.
This 16″ Electric Chain Saw is easy to use and can help in pruning, firewood-cutting, trimming trees. It features a 16″ kickback car and chain, which reduces chances of kickback which makes it safer to use. It works on electricity.
This is a Airman brand 185 cfm air compressor, used to run air hammers or blow out sprinkler systems and needs to be towed with a 2″ ball or pintle hook.
This is a Bostitch brand 2.0 horse power electric air compressor, 3.4 cfm. and has a 6.0 gallon tank.
This is a Rol-Air wheelbarrow style compressor for easy transportation. This is ideal for a homeowner that needs to blow out their sprinkler system lines and other light home usage.
The 12″ Virginia Abrasive brand diamond blade allows you to cut into concrete or asphalt depending on the blade. Blades can be purchased for $95 per blade.
This is a 14″ Virginia Abrasives brand diamond blade. We have both concrete and asphalt cutting blades which rents out with our saws. Blades can be purchased for $125 per blade.
The Milwaukee right angle drill (1/2″) is angled at 90 degrees and is used to drill with in tight spaces.
This is a Bosch brand angle grinder that excepts 4 1/2″ cutting, grinding or diamond blades.
This is a Bosch brand angle grinder which excepts 7″ cutting, grinding or diamond blades.
This is a Sullair brand air hammer ideal for breaking rock. You will need at least a 185 cfm air compressor to run the hammer. This item goes out with a point and chisel and there is a $7 resharpening fee if used.
This is a Wacker brand hammer drill, weighs 25 lbs. Shank- spline, input voltage 115. Designed for breaking or drilling concrete, brick, asphalt, light stone, terrazzo and frozen or hard ground.
The impact gun is 1/2″ electric impact wrench which produces up to 240 ft. lbs. of torque to easily tighten or remove fasteners Our 1/2″ drive electric impact wrench has a 7 amp motor to fasten or remove fasteners without a lot of work.
The Bosch Brute (11304) jack hammer is a demolition hammer that can break up concrete and other hard surfaces. Included in this rental is one chisel and one point along with a 25′ power cord.
The router is a workhorse tool for wood woodworking. Loose or floating tenons are a remarkably useful variation on the traditional mortise-and-tenon.
The Milwalki 10″ compound miter saw is a 45 degree tilting blade gives a precise bevel, miter and compound cuts. The saw makes smooth, accurate cuts in moldings, 2 x 4’s, PVC and other materials.
The Milwaukee 10″ miter saw has an innovative Angle Transfer System is easy, simple way to make accurate crown, chair rail and base miter cuts.
The 14″ wet saw for cutting brick or pavers. It is electric powered. Aldian will supply extension cord to power this saw.
The Ceramic Tile Saw is a wet saw for tile with 10″ blade. If you will be making angled cuts please ask for angle jig.
The ceramic tile saw is a wet saw for cutting small tile, if making angled cuts please ask for angle jig.
This is a Bosch brand cut-off saw with 12″ blade, cuts concrete, metal and blacktop. This is an electric powered cut-off saw unit ideal for inside use.
This is a Bosch brand cut-off saw with 14″ blade, cuts concrete, metal and blacktop. This is an electric powered cut-off saw unit ideal for inside use.
Dolmar 6414, it is a gas powered saw with 14″ blade, cuts concrete, metal and blacktop. This gas powered unit is not to be used inside unless there is plenty of ventilation (For out door use only).
This is a Dolmar 6412, cuts concrete, metal and blacktop. This is a gas powered unit and it’s not to be used inside unless there is plenty of ventilation (For out door use only).
The Milwaukee, jigsaw is ideal for cutting wood, metal, and plastic and for making straight and curved cuts.
This is a Craftman’s brand table saw ideal for most of your cutting needs.
We do not have this saw at the moment. Please call to inquire about when it will be back in the inventory.
The Milwaukee circular 7″ saw is best used for cutting wood.
The Milwaukee sawzall saw is used in construction and demolition work. This feature is primarily for wood, allowing quick cuts.